Changelog

Version 4.5

General

• Added: Simulation of the tool paths in 3D view (dynamic nc path simulator with slider and single steps)

• Added: Save state of the UI expanders (expanded or collapsed) in the windows of the machining operations

• Optimized: Rendering and 3D view of toolpaths (Zoom to mouse location, move current 3d view with left mouse button)

• Fixed bug with gcode output without spaces and line numbering

• Added new postprocessor setting: Skip tool change output for first tool operation

• Added new postprocessor placeholders for gcode output (default values like safety height, plunge height, etc.): <default_tool_number>, <default_safe_height>, <default_plunge_height>, <default_start_height>,<default_depth>, <default_cutting_depth>, <default_engraving_height>, <default_cutting_height>, <default_number_of_cuts>, <default_plunge_feed>, <default_spindle_speed>, <default_interpolation_precision>

• Changed window position for open and show cnc files / gcode files (notepad)

• Added: Reset button to reset all plug-in settings back to default state, To redisplay the welcome screen at application start 

• Added: New default value in presets for allowance/offset 

• Optimized: Application user interface (add expander for profile selection, changed expander styles)

• Changed: Position of branding icon and application settings button

CamDRAW

• Added: Save last used tool number for adding new machining operations instead of tool number 1

• Changed: Default machining parameter values for inch

• Fixed bug with spindle off text output if first tool operations are deactivated

• Added and changed cnc machine presets/postprocessors: Added new postprocessor Vision CNC Engraver and Routers, Changed Mekanika CNC Routers postprocessor (removed M6 for tool change, only T..., skip tool change on first tool operation), Added new Mekanika postprocessor for smoothing with G64 P0.1

• Changed translation textes: Info message about cnc hardware on welcome screen

• Changed: File extension of tool database (.tdb)

WazerDRAW

• Added: Save last used material for adding new cutting operations instead of first material

• Changed RGB color for tab points for contour cutting

• Added: Support for WAZER Pro waterjet (software now supports WAZER Desktop and WAZER Pro)

• Added: Two different material databases for different WAZER machines

• Added: Window message on first application start asking user which WAZER to use

• Changed: File extension of material database (.mat)

• Added: New presets value for nozzle compensation / offset, User can define a static offset to compensate the nozzle wear

Version 4.3

General

• Optimized application installer

• Plugin version number in CorelDRAW addon header removed (show application name only)

• Changed version number to major and minor only

CamDRAW

• Added some new presets/support for more cnc machine manufacturers: Maker Store, Quantum, Roland iModela, Roland MDX 540, WorkBee, Servo, Gravograph, FoxAlien, FROG Mill, Mecanumeric, Millright, Haas, Geetech

WazerDRAW

• Released: WazerDRAW (WAZER waterjet cutting software: Standalone plugin/product)

Version 4.2.3

General

• Added automatic selection of units at first application start

CamDRAW

• Pocket machining strategies optimized (less creation of arc-shaped curves, reduction of time for G-code creation)

• Fixed bug with invalid tool paths for combined curve objects with pocket machining

• Fixed bug with invalid contour (first contour) with pocket machining

WazerDRAW Module

• Opimized tab feature in contour cutting operation: Set size of tab points automatic for different objects sizes, set scaling up to 200% of tab points

• Optimized translations

• Optimized user interface and icons

• Optimized setup / installer

• Add feature to create and reset the default work area size for WAZER Waterjets CNC machines (18x12 in / 460x305 mm)

Version 4.1.2

General

• Post processor / presetting file: Turn spindle off output now supports more than 1 line, For customisations of spindle off commands at the end of operation: E.g. ATC with moving axes to defined position, Required version number of post processors changed to 1.4

• Added verification whether the version number of the postprocessor is suitable for the current software version

• Fixed bug with re-selection of profile not read again post processor settings

• Fixed bug with rendering G-Code if G-Code output without spaces

• Added the most commonly used file extensions (.tap, .cnc, .nc, .gcode, ...) for saving/exporting G-Code files (Save File Dialog), Of course, the file extensions can still be set in the presettings / postprocessors

• Added function to create gcode in separate files: Each toolpath / operation is written to a separate file, Useful if the CNC machine only supports one tool per file, for example

• Added new button icon pack: All button icons have been changed and optimized

• Added new functions for reordering and changing the order of tool operations: Deleting operations reorders all other operation numbers, Selected tool operation can now be moved one up or one down in the order of all tool operations

• Fixed bug with wrong translations

• Added new translations

• Added new tooltips with explanations

• Added additional button to open software settings

• Added window query at the first start of the application for selecting the user's CNC hardware

• Optimized software activation window: Activation key input, Activation informations

• Optimized 3D rendering and colors

CamDRAW

• Changed: Standard G-Code presets are now called "G-Code (Standard)" --> Generate G-Code in separate files for each tool used

• Changed: Standard G-Code presets with autmatic tool changer now called "G-Code (Standard) - ATC" --> Generate G-code in one file (all tools used are represented in this file)

• Added support for more CNC machines and hardware, new presetting files (postprocessors):
  LinuxCNC presets
  Mekanika CNC Routers presets
  Felder Hammer HNC presets
  Carbide 3D Nomad 883 ATC presets
  Carbide 3D Nomad 883 presets
  Carbide 3D Shapeoko presets
  Sainsmart 3018 MX3 presets
  Sainsmart 3018 PRO presets
  Sainsmart 3018 PROver presets
  Sainsmart 4030 PROver with Probe presets
  Sainsmart 4030 PROver presets
  Sainsmart 4040 PRO with Probe presets
  Sainsmart 4040 PRO presets
  X-Carve presets

Version 3.11.21

General

• Optimized some language translations

• Added new logo files

• Added translations for subscriptions license infos

Version 3.11.20

General

• Added support for CorelDraw Graphics Suite 2024 (Version 25)

• Added support for CorelDraw Standard 2024 (Version 25)

• Added support for CorelDraw Technical Suite 2024 (Version 25)

• Fixed installer for newest CorelDraw versions (wrong directory)

Version 3.10.19

WazerDRAW Module

• Added new logo files (OEM Cameo)

Version 3.10.18

• Added new presetting files / postprocessors: Masso G3, PolyShaper

• Installer (Setup program) optimized

• Changed branding of the application: New Camdraw branding

Version 3.9.18

• Added up to 10 profiles / postprocessors files settings

• Problem solved with wrong rendering: Postprocessor header

Version 3.8.17

• Added Workpiece coordinate system selection (G54, G55, ...)
  Under workpiece data user can now select coordinate system which will output in G-Code file 
  Postprocessor parameter <wcs>

• Added output of an individual comment character in the postprocessor settings

• Added postprocessors for MultiCam and Kosy MaxComputer CNC Routers

• Problem solved with turning off spindle output after operation if command textbox is empty

• Added cut start/end postprocessor textes in pocket engraving operation
  For laser pocketing machining

• Problem solved with wrong XY zero point postion if CorelDraw document not created with CamDRAW plugin

Version 3.7.16

• Fixed bug with showing wrong license status if valid license is available

• Added new postprocessor for X-Carve and X-Carve Pro CNC Machine from Inventables

Version 3.7.15

• Problem solved with feed rate output for rapid movement

• Problem solved with output first line of machining:
  Movement to first position after custom post processor sections (e.g. cut start, cut end)
  Now software will output first position with repeat all positions and feed rates (because possible movements and feeds in custom post processor sections)

• Added/Changed draw workpiece origin (zero point) according to standardized symbol

• Added error message if tool diameter is not defined or zero (while creating toolpaths)

• Added information for remaining days of trial version

• New company logo used

Version 3.6.12

General

• Changed display of comment characters in postprocessor settings to text form

WazerDRAW Module

• Added Wazer specific translations

• Added Wazer specific display of functions

Version 3.6.11

• Tool library expanded:
  Tool shape added (cylindrical/conical)
  Tool angle (e.g. graver) added
  Finishing and roughing feedrate added
  Lead-In and Lead-Out informations can be stored in the tool
  Tab width can be stored in the tool
  Additional information such as material, pierce time etc. can now also be stored in the tool
  Added option for duplicate selected tool
  Added options for move selected tool upwards and downwards in tool list
  Added options for import and export tool library
  Added tooltips for all inputs in tool library

• Display tool diameter in operation toolpaths:
  Support for conical tool --> Display of the correct tool diameter

• Added option for normal, finishing and roughing feed rate in any machining operation:
  Parameters for different feeds are stored in the tool data
  Option specifically for laser, plasma and waterjet cutting for different cutting quality

• Added new placeholders for postprocessors to use in G-Code:
  <material> --> Tool data e.g. for workpiece or raw material
  <pierce_time> --> Tool data Holding time to wait until the material is cut through
  <info1> --> Tool data Additional information 1
  <info2> --> Tool data Additional information 2
  <info3> --> Tool data Additional information 3
  <toolpaths_size_x> --> Width of all active tool paths
  <toolpaths_size_y> --> Height of all active tool paths

• Optimized Lead-Ins and Lead-Outs for contour milling:
  Lead direction detection added
  Automatic add lead-in or lead-out at longest segment of contour (closed curves)
  Combined curves are recognized as belonging together --> required for lead direction detection for inner or outer milling contours

• Added cutting data input/area for all machining operations:
  The plugin reads the cutting data from the tool data
  Now these cutting data can be overwritten for individual operations (If desired, otherwise the tool data are taken over)

• Optimized data input (keyboard input) for all operation windows:
  Refocus textboxes after drawing
  Added progress ring while drawing and generating toolpaths

• Changed feedrate for drilling (important):
  Feedrate for drilling changed to normal feedrate instead of plunge feed rate
  Tool data must be adapted

• Added default post processor for Laser / Plasma / Waterjet cutting
  One with only XY axis movement
  One with XYZ axis movement

• Added operation type to tooltip of operation

• Removed "HelpObjects" layer on creation of new CorelDraw document

• Fixed:
  Problem with wrong machining directions in contour milling and contour cutting operations
  Problem in contour engraving operation with drawing toolpaths left side
  Problem with installer if more than one Addon file exists (now all addon files from Shaping folder will copied)
  Problem while creation of toolpaths for pocket milling and pocket engraving (Application did not display the toolpaths - layer problem)
  Problem with deactivation of selected shapes while add new machining operation
  Problem with double toolpaths in contour milling and contour cutting operation if leads are active

Version 3.5.10

• Added tangential axis / tangential knife:
  Software can now produce G-Code for cnc machines with tangential axis
  Tangential axis is rotation axis around the Z-axis (in degree)
  Always orients the tangential axis tangential to the contours
  With detection for Z upward movement (if angle greater than constant value in postprocessor settings) --> lift off and rotate tangential axis

• Added repeatly rapid movement and position on the start of any machining operation

• Changed "turn spindle on" to "turn spindle off" in postprocessor settings:
  If next operation needs another tool, then software will turn off spindle on the end of current operation with this text (e.g. M5)

• Added post processor for GRBL milling: XYZ axis

• Added post processor for GRBL Carbide 3D milling: XYZ axis

• Added post processor for tangential axis: XYZA axis
  Where A is tangential axis

• Added post processor for Industrial CNC Routers: XYZ axis

• Added option to show/hide autmatic strategies for generating G-Code
  Automatic strategies are for generating G-Code of whole CorelDraw sheet
  Default setting is hide the automatic strategies

• Added post processor setting: Output without spaces in lines

• Added post processor setting: Inch or Millimeter texts
  Software reads out the CorelDraw sheet units before generating
  If Inch --> Will take Inch text (mostly G20)
  If Millimeter --> Will take Millimeter text (mostly G21)
  Placeholder for postprocessor is <units>

Version 3.4.10

• Added new sorting algorithm for contour cutting (laser/plasma/water):
  Always work from inside to outside + detection of lead direction for centered contours
  For inside contours lead from inside, for outside contours lead from outside

• Added tab feature for laser/plasma/waterjet cutting:
  Tabs leave small pieces of material when contour cutting. These fix the material after cutting through.
  Number of tabs can be set.
  Width of tabs can be set.
  Automatic position (even distribution of tabs).
  Individual tabs can be moved to any position with the mouse.
  Leads are always created at the beginning and end of tabs.

• Changed leads position in cutting operation (laser/plasma/water):
  No longer with percentage, now automatically in the middle of the longest segment of the curve.

• Optimized lead direction detection for cutting operation:
  Combined curves are detected as contiguous (required for lead direction detection for inner or outer cutting contours)

• Changed operation windows to no dialog:
  Operation windows are displayed in the foreground
  CorelDraw application is still controllable if operation window is open (view, zoom, etc.)

• Added progress ring for cutting contour window (during calculation of toolpaths)

• Added placeholder in postprocessor texts:
  <workpiece_left_x> (define x-position of left workpiece edge)
  <workpiece_right_x> (define x-position of right workpiece edge)
  <workpiece_top_y> (define y-position of top workpiece edge)
  <workpiece_bottom_y> (define y-position of bottom workpiece edge)

• Added placeholder in postprocessor texts:
  <toolpaths_left_x> (define left x-position of bounding box of all active toolpaths)
  <toolpaths_right_x> (define right x-position of bounding box of all active toolpaths)
  <toolpaths_top_y> (define top y-position of bounding box of all active toolpaths)
  <toolpaths_bottom_y> (define bottom y-position of bounding box of all active toolpaths)

• Installer: Added install directory detection if plugin is currently installed

• Fixed bug with closing progressbar window and cancel generation

• Fixed bug with sorting to numeric textfields (textfields without numbers)

Version 3.3.8

• Added automatic selected language on first start from windows UI language

• Added version number to postprocessors

• Added/Changed width and height inputs: Default strings for inputs in postprocessors are empty --> Only overwrite if string in postprocessor is not empty (all inputs are now translated)

• Added function to automatically add text fields for all curve objects (new curve objects menu)

• Added function to sort all curve objects by text field numbers (put them on layer "SortedCurves")

• Added: Text/Block for G-Code output for operation end (blocks for operation end can now be inserted in postprocessors)

• Changed menu "Curve duplicates" to "Curve objects" with more functions

• Changed function check for curve duplicates: Open window without searching for duplicates (searching with click on button check)

• Fixed bug with open older CorelDraw documents: Error message string out of range

• Added postprocessor for CAMaster with WinCNC - INCH (without tool changer)

• Added postprocessor for CAMaster with WinCNC - INCH (with tool changer)

• Added postprocessor for Weihong NCstudio

• Added postprocessor AM.CO.ZA EasyRoute

• Added message if no curves for automatic strategies have been found

• Added more supported comment characters in postprocessor settings

• Added postprocessor setting: Adjustable output comment on operations start --> e.g. (Contour 1)

• Updated all postprocessor files to V1.1

• Changed comments detection while rendering in gcode

• Fixed bug with open document and postprocessor not founded

Version 3.2.7

• Added OEM version: RouterCAM

• Added license info on Docker and window titles

• Added tangential Lead-Ins and Lead-Outs

• Fixed bug with wrong climb or conventional machining when using Lead-Ins and Lead-Outs

• Added and optimzed Lead-In and Lead-Out strategies: Entry and exit are now separately adjustable (Option for lead-in or lead-out or both)

• Fixed bug with wrong Lead-In & Lead-Out if sweeping angle is 90 or 180 degrees (Curve algorithm welds leads)

• Fixed bug with wrong operation window height with high WINDOWS scaling mode (125%, 150%)

• Added languages: Spanish, French, Portuguese, Chinese, Japanese

• Added Lead-In and Lead-Out option for contour milling and contour cutting: Sweeping angle, linear distance, keep tool down

• User interface (design) optimized: Used Expander instead of GroupBoxes in Operation Windows

• Fixed bug with turning on spindle by G-Code creation in strategies of all CorelDraw drawing objects

• Language translations optimized

• Added feed rate unit to strategies of all CorelDraw drawing objects

Version 3.0.2

• Removed maximum number of lines for trial version: Trial version is now no longer limited to 500 lines of G-Code

• Added tool list informations in G-Code: Tool number, diameter, spindle speed, tool name

• Changed location in G-Code where spindle turn on: Now spindle will turn on on start of operation (spindle output in post processor setting will activate/deactivate spindle output)
  Important: Please remove "M03 S<s>" in your post processor settings at the end of tool change text or use the new post processors

• Added post processor setting: Command name to turn spindle on (M3/M4)

Version 3.0.1

• Changed location in CorelDraw main menu to activate the plugin/docker:
  Now plugin can activated in "Extra" tab of CorelDraw main menu --> "Extra / gCode Generator"
  Before that it was under "Window / Dockers / gCode Generator"
  Please reset your workspace with press and holding "F8" while CorelDraw starts!

• Fixed bug in pocket milling cycle: Plunge in the material for the next cutting plane on wrong shape (last shape instead of first shape)

• Fixed bug with generated G-Code: Remove space at the end of the line

• Added and optimized node/curve precision algorithm:
  Now user can set up a curve precision in length unit (e.g. Millimeter or Inches)
  This curve precision is used for linear interpolation on curves
  Curve precesion is the smallest segment length / distance (for which CNC machine will drive linear with G1)
  This curve precision is independent of the total length of the curve --> (This means fewer support points on short curves)

• Added new default curve precision value to postprocessors settings

• Increased tooltip time for machining operations: Showing machining parameter, e.g. cutting speed etc.

• Added feature for climbing and conventional milling

• Added feature: Select your curve sorting algorithm for contour milling and engraving
  Now user can select whether the software should sort all curves of operation automatically 
  Or machining sequence of the sequence on the CorelDraw layer

• Changed name of pocket and island milling --> Pocket milling

• Changed name of pocket and island engraving --> Pocket engraving

• Added translations of all error messages and info messages in software

• Added translations of all window titles in software

• Added and optimized new software user interface (GUI design):
  Complete new design of software available
  User can change theme colors
  User can change theme mode: Light and dark mode
  Default theme color --> "Steel"
  Default theme mode --> "Light"
  Optimized window handling: Automatic window size to screen resolution, most windows can now minimized or maximized

• Added new MessageBox for error and info messages

• Changed button to open the settings window --> Button is now the company logo on the top of the plugin/docker

• Added support for Windows 11

• Removed functions in software (not really in use):
  Request support button on setting window
  Additional text features
  Additional nodes features (add and remove nodes)
  Additional alignment features
  Additional import function

• Added function to automatic copy all application settings from gCode Generator 2 to gCode Generator 3 (only once on first start)

• Fixed bug with no output numeric line numbering (User defined textes)

• Changed locations of rendering settings: Settings for rendering engine are now in profile / postprocessor settings

• Fixed bug with no rendering if no z axis output

• Added axis designations to 3D viewport

• Fixed bug with rendering: Other G commands than rapid and linear movements

• Optimized rendering engine

• Fixed bug with showing logo in different colors

• Changed setting for round workpiece shape: Now available under measure range (measurement grid)

Version 2.6.12

• Fixed bug with AutoNum algorithm and closed shapes/curves (numbered order for machining through text fields): 
  The machining sequence was not adhered to because text fields were within closed curves

• Problem solved: When creating or editing a tool operation, a toolpath is not created or the current one is not changed and the selected drawing object is deleted. 
  The message was "Reference object no longer available"

• Fixed incorrect machining depths in the contour and pocket milling cycle (wrong depth with multiple pockets / contours)

• Changed all error messages (windows) in application to full error description of the exception

• Problem solved where corel crashes while a document is being saved (now data transfer is deactivated while document is being saved)

• Higher Z coordinate added for the first plunge process. For a better overview from where the machining operation starts

• Changed: Now application hides the layer "ToolPaths" when a new tool operation is created or edited --> Only the current tool path is displayed --> Better overview

• Added/Changed: Now application shows operation information like cutting depth or feed rate when the mouse is over it --> Extra area / box with op information removed

• Problem solved: Corel crash if user want add a tool operation (all toolpath window) and click on "Cancel" instead of "OK"

• Changed reference point for pocketing cycle to center of shape/curve (find next and nearest pocket/shape)

• Changed start pocket/shape for pocketing cycle to closest shape to left and top corner of CorelDraw page

• Problem solved with Corel crash if user import cdr drawing instead of open cdr drawing (only drawing which is created with gCode Generator)

• Pocket cycle / inlay cycle / engraved pocket cycle optimized:
  Fewer plunge processes, problem solved with repeated immersion for individual contours of the pocket

• Default value of the contour accuracy (tolerance) for new operations set to 6

• Rendering: Problem solved with driving directly from zero

• Sorting algorithm expanded / adapted for contours: Machining from inside to outside
  Now sort the curves from the inside to outside (e.g. rectangle with hole)

• Application layer, e.g. "ToolPaths" are now set to not editable. This means that when a document is opened again, the user's drawing layer is always active
  Fixed problem with drawing on application layer after open a document.

• Application message added if user is using a Coreldraw version lower than 17.6: The creation of parallel toolpaths from open curves/contours is only supported by CorelDraw 17.6 or higher

• Problem solved: With incorrect 3d visualization (rendering) for very large drawings / page sizes

• Maximum number of G-Codes output lines in trial version changed to 500

• Changed logo and icon style

Version 2.4.3

• Changed surface measurement (create measure grid):
  Now the measuring grid is defined over the number of point in X- and Y-direction
  Measuring points size will draw depending on workpiece size (size of Corel sheet)

• Added machine setup file:
  The machine setup file is created parallel to the job file of G-Code while G-Code generation
  This file can use for setting up the machine, e.g. measure the workpiece surface or set zero points
  This machine setup file have to run before job running
  All placeholder / postprocessor parameters are available in this file, e.g. number of measuring points <nx>

• Changed the trial version restriction to a maximum G-Code line number of 300

• Fixed bug with rendering G-Code (e.g. Gosub line command)

• Added scale function to zero point of drawing (the size of zero point now set automatic)

• Added automatic generate G-Code function for contour milling and engraving

• Change node algorithm to curve precision:
  Now the node factor is call curve precision
  Curve precision is the precision for the linear interpolation for curves
  Each curve or arc (except straight lines) is approached by small segments
  Original shape/curve of drawings will not be changed

• Added some new postprocessor settings: Standard values

• Added postprocessor setting: Mark/sign for comment in G-Code can be adapted to brackets "()" oder semicolon ";"

• Added funtion for automtic generate G-Code for contour cutting (laser/water):
  This strategy is for generating G-Code of whole CorelDraw page
  Sequence of toolpaths can be numeric (with numeric textfields e.g. 1,2,3 or 1.1, 1.2, 1.3)
  Sequence of toolpaths can also be optimized automatically
  A specific feed rate can be assigned to each layer

• Added postprocessor function for repeat/not repeat coordinates

• Added postprocessor function for output/not output each axis

• Fixed bug while G-Code generation: "Could not generate G-Code!"

• Fixed bug if docker closed and reactivate: application crash

• Added function for search and find curve duplicates

Version 2.1.1

• Added function/button to show the generated gcode (open with notepad.exe)

• Solved bug with drilling operation: start text for operation is now displayed in gcode file

• Added more machining strategies (engraving, milling, cutting laser/water)

• Changed engraving depth regulator strategy: Now with its own strategy

• Optimized pocketing strategy: Less plunge cycles

• Changed and optimized progress window while generating GCode

• GCode generation is now on own thread

• Changed and added some postprocessor settings: Repeat, Factor, Sequence of GCode line supported, increment and start for line number

• Added more supported postprocessors which are included in installation (EdingCNC, Mach3/4, cncGraf, WinPC-NC, PlanetCNC, Benezan Beamicon, BZT, Estlcam)

• Changed maximum workpiece size for different editions: See "Compare editions"

• Changed docker size width: Now the docker/plugin automatic adapts to the coreldraw docker size width

• Added icons for different machining operations/strategies

• Changed and fixed rendering of GCode: Now zero point is shown

• Changed/Added display of machining data and parameters: Select operation and all data will list up directly under

• Fixed bug while GCode generation: app crash

• Fixed bug with edit a operation

Version 2.0.0

• Changed App structure (Now only the CAM envirenment is available, CNC environment to control cnc machine is out)

• Added many new features:
  Save and open gCode Generator project files (App save all settings, inputs and toolpaths to current document. After open or change a document, all settings are instantly available)
  Work on different documents at the same time (Document tabs)
  Toollist (All tools are stored here. This tools are used for machining operations)
  Create contour tool path (middle, left, right, inside, outside a curve shape) --> Contour machining
  Create pocketing tool path (App create curve shape to mill a pocket) --> Pocket machining
  Create drilling tool path with different drilling cycles () --> Drilling machining
  Automatic increase in the number of nodes

• Changed the path optimization

• Changed input mask for workpiece data

Version 1.8.0

• App/Plugin is now completely available in English and German (more languages will follow)

• Support for more CorelDraw versions (e.g. CorelDraw Home&Student)

• Changed/fixed installer for support other CorelDraw versions

• Changed and optimized workpiece data input mask

• Added support for rotation machining if z zero point is on cylinder axis (switchable between cylinder axis/surface)

• Added support for rotation machining above/below cylinder axis

• Added settings for different postprocessors and profiles:
  Now each postprocessor can be stored in a profile in the app
  The correct profile/postprocessor is selected before each processing
  12 standard post processors are also installed
  Each processors can be customized
  Processors can be saved / exported

Version 1.6.0

• Changed directory for default icons for macro buttons: ...\Addons\gCodeGenerator 1\Icon\default

• Removed unnecessary files in installer for x86 and x64 systems

• Solved bug with app crash if user click import without select a item in listbox

Version 1.5.0

• Added Cleaning up backup files, limited now to 50 files, older ones are deleted

• Changed AppUI scale:
  Now App (Docker) height adapts dynamically

• Added support for different languages:
  Main language ist german
  Docker UI is now available in english
  Further windows and translation for englisch will follow
  Further languages will follow

• Added support for different units:
  Inch / Feet / mm / cm / m

• Added splash screen for application start

• Solved bug with text field with many characters:
  These text shape is converted to curve and Corel grouped it
  Grouped shapes are not allowed during Gcode creation

• Added option to activate or deactivate spindle for different profiles

• Added option to reset/delete current CorelDraw page and machining mode

• Added option to add text with different text height units (pt/mm/Inch)

Version 1.3.0

• Added support for windows app scale factor (display settings)
  Now it is possible to run app e.g in 125% scale factor

• Added function to import files (.cdr, .pdf, .bmp, .dxf, .jpf, .gif, .png, .plt) to "Gravurlayer"
  Before import, App shows a preview of the current file

• Added support to align shapes in reference to center or border

• Added support to change position or size of the align object (e.g. align shape in user defined area)

• Added a object manager in app ui:
  Show all shapes, contours, layers of current CorelDraw page/document

• Added support to move selected shapes on a help layer, which will ignore in generate the gcode
  All shapes on this layer will ignore through the generation of the gcode program

• Added CAM settings: G-Code-File will generate with this user defined settings/lines
  Programm_Start: At the beginnging of the G-Code-program
  Programm_End: At the end of the G-Code-programm
  Contour_Start: Before a single contour will engrave

• Solved bug with import path from ini file: app crashes if directory not exists

Version 1.1.0

• Added new modern App UI

• Added support for CorelDraw Standard 2020

• Added new node algorithm
  Static: Add/Remove nodes in center of segment
  Dynmaic: Add/Remove nodes dependent on curvature and segment length
  Therefore: Settings parameter segment_length and curvature added to DockerUI

• Solved bug with missing cutting planes

• Solved bug with application crash, if window "Viewport big" is open and user changed engraving mode

Version 1.0.0

• Release of first CamDRAW Version

• Support for different versions of CorelDraw (X7,X8,2017,2018,2019,2020)

• Also supporting SpecialEditions of CorelDraw (OEM versions)

• Also supporting 32- and 64 bit CorelDraw versions